Subscription

Get E-mail on new products



Blog

  • 2016-09-26 FIXPAL blind rivets introduction

    Monobolt rivet is a structural rivets, monobolt rivet with good performance in holes filled, air tightness, high riveting intensity. monobolt rivets can be used in the field of higher surface requirements, riveting high strength requirements, a higher sealing performance requirements .

    Blind Rivets,đinh tán mù,заклепок,מסמרות עיוורות,remaches ciegos,rivetti,kör perçin,ตาบอด rivets,rivets abaziimfama,izipikili blind,rebites cegos,ブラインドリベット,caecus rivets,aklinos kniedės,rivet buta,popnagels,블라인드 리벳,rivets aveugles,заклепок,Blindniete,seamanna dall

  • 2016-03-08 This paper introduces the advantages of pull riveting together with principle 暂无简介!
  • 2016-03-08 This paper introduces the advantages of pull riveting together with principle

    Usually riveted by plate on one side of the insert is the rivet, and must be in top iron mat, reoccupy rivet riveting, but using a riveter riveted, you just need to unilateral action. Riveting gun riveting is often used in hand or top iron cannot reach the bottom side of riveting.

    Principle of riveted together.

  • 2016-03-08 This paper introduces the advantages of pull riveting together with principle

    Usually riveted by plate on one side of the insert is the rivet, and must be in top iron mat, reoccupy rivet riveting, but using a riveter riveted, you just need to unilateral action. Riveting gun riveting is often used in hand or top iron cannot reach the bottom side of riveting.

    Principle of riveted together.

  • 2016-03-08 This paper introduces the advantages of pull riveting together with principle

    Usually riveted by plate on one side of the insert is the rivet, and must be in top iron mat, reoccupy rivet riveting, but using a riveter riveted, you just need to unilateral action. Riveting gun riveting is often used in hand or top iron cannot reach the bottom side of riveting.

    Principle of riveted together.

  • 2015-08-14 From the cost management perspective fasteners, rivets product design cost

     

    From the cost management perspective fasteners, rivets product design cost

    Compared with traditional cost accounting and cost management pay more attention to blind rivet cost control, full cost management model will now permeates the pop rivet cost management enterprise cost accounting cost prediction, steel rivets later assessment of cost control and analysis,pop rivet and so on each link, in participating in aluminum rivets product research and development stage cost control work. By participating in steel rivet product's design stage cost audit, can control the higher prices for the use of material, process of means to reduce the rivet products such as to reduce costs, improve the economic benefit.

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2015-03-19 Lean advocates eight functions-2

    Whether success lean transformation and blind rivets enterprise internal have competent lean advocates are inseparable, closely related.So good lean advocate which functions need to be?

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2015-03-16 Lean advocates eight functions

    Whether success lean transformation and blind rivets enterprise internal have competent lean advocates are inseparable, closely related.So good lean advocate which functions need to be?

     

    Develop and implement strategic-Fixpal blind rivets
    yuanda rivet supplier Lean advocates, external consultant's help, according to the actual situation of enterprises (challenges, available resources, the ability to change, etc.) for lean implementation strategy step by step. Fixpal rivet manufacture in the lean into its business in china team, in its first manufacturing plant will lean to the ascension of the improvement of quality, yield, shorter delivery time and accelerate inventory turnover.In pop rivets factory manufacturing base lean transformation after the preliminary results, on the one hand, through participation and continued to expand the factory, on the other hand apply lean to after-sales service to shorten response time, accounts receivable management, vertical market development, new product research and development of manufacturing;And are currently will lean to its pop rivets target market of customers.

     

    To ensure the information flow-Fixpal blind rivets
    For fixpal blind rivets businesses, lean transformation is significant.In any change, due to various reasons (such as don't understand, don't identity, etc.) will have cadres and workers to take things claptrap, hang, or even eliminate and prevent high attitude. Blind rivets Competent lean advocates will take every opportunity to ( rivets business review meeting, each quarter regular pop rivets meeting every week, every business problem, etc.), all channels (meeting, company internal electronic journals, wallboard, etc.) to introduce lean transformation vision, objectives, each stage, the current progress, achievements and challenges.
    Change masters, of Harvard University professor kotter "communication requires both words and actions, while the latter is more important." therefore, competent aluminum rivets factory lean advocates is not only the disseminator lean thinking but also the practitioners of lean thinking.

     

    Show patience willpower-Fixpal blind rivets
    As long as the right direction, lead wisely, project choose right, lean can achieve significant results in a shorter time.Such as blind rivets product failure rate fell by 90% 80%, shorten the alu rivets product delivery cycle, But the lean transformation is a process rather than a movement or an event.In the process of after years there will be twists and turns, can appear repeatedly.5 一10 rivets lean advocates recognize the need for years to will change process, behavior habits into enterprise culture.

     

  • 2015-03-16 Lean advocates eight functions

    Whether success lean transformation and blind rivets enterprise internal have competent lean advocates are inseparable, closely related.So good lean advocate which functions need to be?

     

    Develop and implement strategic-Fixpal blind rivets
    yuanda rivet supplier Lean advocates, external consultant's help, according to the actual situation of enterprises (challenges, available resources, the ability to change, etc.) for lean implementation strategy step by step. Fixpal rivet manufacture in the lean into its business in china team, in its first manufacturing plant will lean to the ascension of the improvement of quality, yield, shorter delivery time and accelerate inventory turnover.In pop rivets factory manufacturing base lean transformation after the preliminary results, on the one hand, through participation and continued to expand the factory, on the other hand apply lean to after-sales service to shorten response time, accounts receivable management, vertical market development, new product research and development of manufacturing;And are currently will lean to its pop rivets target market of customers.

     

    To ensure the information flow-Fixpal blind rivets
    For fixpal blind rivets businesses, lean transformation is significant.In any change, due to various reasons (such as don't understand, don't identity, etc.) will have cadres and workers to take things claptrap, hang, or even eliminate and prevent high attitude. Blind rivets Competent lean advocates will take every opportunity to ( rivets business review meeting, each quarter regular pop rivets meeting every week, every business problem, etc.), all channels (meeting, company internal electronic journals, wallboard, etc.) to introduce lean transformation vision, objectives, each stage, the current progress, achievements and challenges.
    Change masters, of Harvard University professor kotter "communication requires both words and actions, while the latter is more important." therefore, competent aluminum rivets factory lean advocates is not only the disseminator lean thinking but also the practitioners of lean thinking.

     

    Show patience willpower-Fixpal blind rivets
    As long as the right direction, lead wisely, project choose right, lean can achieve significant results in a shorter time.Such as blind rivets product failure rate fell by 90% 80%, shorten the alu rivets product delivery cycle, But the lean transformation is a process rather than a movement or an event.In the process of after years there will be twists and turns, can appear repeatedly.5 一10 rivets lean advocates recognize the need for years to will change process, behavior habits into enterprise culture.

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2014-03-16 Testing of blind rivets

     

     Testing of blind rivets

    A blind rivet has strength properties that can be measured in terms of shear and tensile strength. Occasionally rivets also undergo performance testing for other critical features, such as pushout force, break load and salt spray resistance. A standardized destructive test according to the Inch Fastener Standards is widely accepted.
    The shear test involves installing a rivet into two plates at specified hardness and thickness and measuring the force necessary to shear the plates. The tensile test is basically the same, except that it measures the pullout strength. Per the IFI-135 standard, all blind rivets produced must meet this standard. These tests determine the strength of the rivet, and not the strength of the assembly.

  • 2014-03-06 SCREWDRIVING AND RIVETING ASSEMBLY

     

    Manufacturers are always looking for ways to improve quality and reduce scrap to increase their bottom line.  One way to do this is by adding process intelligence to your Orbital assembly system.  The physical part and or part specification always dictates what type and what configuration is needed.

    Forming to a hard-stop is generally the fastest most repeatable orbital riveting configuration, but variations in part thickness and rivet length will affect the final form. Many times our application engineers form coupons in our Assembly Solutions Lab to determine if a good part can be made at the upper and lower limits of variation.

     

  • 2014-02-26 Why Is Riveting Better Than Welding?

     

    Why Is Riveting Better Than Welding?

    An aircraft is undoubtedly made of the best and strongest materials bonded and fused together to carry the incredible amount of weight of both the passengers and cargo. Holding these materials firmly together is crucial to the safe worthiness of the aircraft. One of several methods used to hold metal parts together include riveting. The process must produce a union that will be as strong as the parts that are joined.

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2014-02-26 How is aluminum used in aircraft construction held and secured together?

     

    How is aluminum used in aircraft construction held and secured together?

    The history of aircraft manufacturing is closely related to the history of creating aluminum alloys. As aluminum evolved into a reliable and durable material, airplanes flew higher, safer and farther. But even though aluminum proved to be the best material for aircraft construction, it would be of questionable value unless aluminum and the other components were held together firmly and securely.

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2014-01-22 What are the components in fastener standards that help to assure goodquality fasteners are supplied?

     

    a. How do standards guide purchasers in correct ordering practices?  

     

    Most standards contain ordering information and examples of ordering

    descriptions. ASTM standards in particular have excellent ordering

    information. Where ordering practices are not referenced within a standard,

    the information and examples in most ASTM fastener standards can be used

    as a guideline. 

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.

  • 2014-01-22 Enterprise Inventory Optimization explore rivets transit

     

    [ REVIEW ] structure is relatively simple structural rivets , nails from the pipe body and body composition, when the production of semi-finished products also need to be fed into the transfer station , waiting for further processing . Because of a tube with a nail rivet body , but can be equipped with a variety of nail tube body , is not one to one , so companies must have a certain amount of semi-finished inventory to raise the issue of the order fulfillment rate . Therefore, companies should not only be a transit rivets library stock , but also improve the effectiveness of this inventory management , optimizing transit warehouse inventory management in order to improve the efficiency of logistics .

    our products is blind rivets , steel rivets,lock bolt rivets,mono bolt rivets,hemlock,drive rivets,AVIBULB,Multi grip rivets,sealed rivets.